Your name · KWTVA

KWTVA · Name

Where Moments Become Memory

Each script here draws a letter its own way: upright strokes, carved blocks, crescents, flowers, capsules and woven rings. Write your name in Arabic and see it in more than one shape, all drawn on your own device. And what comes next is better.

Six scripts so far

Script 01

The vertical script

Thin letters stacked upright on one line, with each dot turned into a diamond. This is the script of my own logo, and where this page began.

Draw your name

One name works best, like مشعل. A full name gets very tall and the idea gets lost.

The look
Options
Font

Work in progressThe way the letters are drawn and arranged is something we keep working on, for better results and new ways to draw names.

How it’s drawn

Letters on one line

  1. The dots

    Each dot is a small diamond sitting on the line with a gap around it: above the letter when its dots are above, below it when they are below.

  2. The letters

    Every letter takes its own form at the start, middle and end of the name. Teeth are sharp bars, loops are open diamonds, and tall letters rise thin from the line.

  3. The name

    The name is written under the shape in Amiri or Reem Kufi, lightly engraved into the surface, and its letters can be stretched.

Everything is drawn on your own device. The name you write is not sent or saved anywhere.

Script 02

The solid script

Every letter is a solid slab, and its shape comes from what is cut out of it as empty space. A long name runs on two lines, and the dots are diamonds too.

Draw your name

One name works best, like مشعل. A full name gets very tall and the idea gets lost.

The look
Options
Font

How it’s drawn

Letters as solid slices

  1. The slices

    Every letter is one tall slab. Letters that join are linked by a narrow channel cut through them, and letters that do not join leave a clear gap.

  2. The empty space

    What makes a letter is what is cut out of its slab: a notch, a slit, a triangle or a diamond. The empty space is as much the letter as the metal is.

  3. The dots and marks

    Dots are solid diamonds. A hamza is a hollow diamond, so it is never mistaken for a dot, and a shadda is a small zigzag above the letter.

Script 03

The crescent script

Every letter is a crescent: a disc with another disc cut out of it. The letters sit close together on one thin line, the dots are small circles, and sometimes the last letter wraps around the whole name.

Draw your name

One word, up to 12 letters, like مشعل.

The look

Work in progressThe way the letters are drawn and arranged is something we keep working on, for better results and new ways to draw names.

How it’s drawn

Letters made of crescents

  1. The cut

    Each letter is one disc with a second disc cut out of it. The cut is real, not a colour painted on top, so the vector works on any background or material.

  2. The line and the tones

    One thin line runs through the whole name, and the letters take turns through three tones of the same metal.

  3. The dots and the wrapping letter

    A dot is a small circle with a gap around it, and a hamza is a small crescent. When a name ends in a letter like lam, meem or noon, that letter grows and wraps the whole name in the brightest tone.

Script 04

Florals

Every letter is a gold-rimmed frame filled with painted flowers, set on a pressed arabesque ground. Written in Naskh or Ruqaa, and the letters can be stretched.

Draw your name

One name works best, like مشعل. Up to 12 letters.

Font
Background
Pattern
Kashida
Name size
Image size

Work in progressThe way the letters are drawn and arranged is something we keep working on, for better results and new ways to draw names.

How it’s drawn

Letters filled with flowers

  1. The letters

    The name is written in Naskh or Ruqaa and thickened a little so the flowers have room, and every letter gets a thin gold rim. The dots stay apart, each in its own frame.

  2. The flowers

    One panel of painted flowers on black lacquer, made with AI, is cut to the shape of each letter. Another arrangement shows a different part of it.

  3. The ground and the kashida

    A geometric arabesque of six-petal flowers, or an eight-point star pattern, is pressed into the ground behind the name. The kashida stretches one joint in each word, before its last letter.

Script 05

The split script

Every letter is a rounded capsule, and one horizontal cut runs through the whole name and splits it in two. Letters join through small round gates, and the dots are small capsules too.

Draw your name

One word, up to 12 letters, like مشعل.

Background
Pattern
Raised 3D

Work in progressThe way the letters are drawn and arranged is something we keep working on, for better results and new ways to draw names.

How it’s drawn

Letters made of capsules

  1. The capsule

    Every letter is built from stadium-shaped capsules, with no sharp corner anywhere. The cuts are real, not a colour painted on top, so the vector works on any background or material.

  2. The cut

    One horizontal cut runs across the name and splits every letter into a top and a bottom half. Where two letters join, the cut opens a small round gate between them.

  3. The relief and the ground

    The letters rise off the ground, lit from the top left, and you choose how deep. The ground is a soft glow with fine grain and, if you like, a pattern of staggered capsules.

Script 06

The woven script

Every letter is a ring, or part of one, cut from a single ribbon that never changes width. The rings touch, and at every touch the ribbon passes over and under, like a braid.

Draw your name

One word, up to 12 letters, like مشعل. Marks like fatha and shadda are kept.

Background
Pattern
Raised 3D

Work in progressThe way the letters are drawn and arranged is something we keep working on, for better results and new ways to draw names.

How it’s drawn

Letters made of rings

  1. The ring

    Every letter is a ring, or a piece of one, drawn with one ribbon whose width never changes. The dots are round and sit on the letters.

  2. The weave

    Where two letters touch, the ribbon crosses itself: in the upper half the letter on the right passes over, in the lower half it passes under, with a soft shadow where it goes beneath.

  3. The relief and the ground

    The ribbon is shaded like a rounded tube lit from the top left, and you choose how deep. The ground is a calm colour with fine paper grain and, if you like, a net of eight-point stars or of interlocking rings.